Header

Search Help

Furnaces

Haier HG95A Series (thumb)

Furnaces Upflow/Downflow Horizontal 95%

  • High Efficiency 95% AFUE provides greater fuel savings
  • No-Weld Tubular Primary Heat Exchanger
  • Secondary Heat Exchanger
  • Installation Flexibility - 4 Position Orientation
Haier HG95A Series (thumb)
Furnaces Upflow/Downflow/Horizontal 95% -

High Efficiency – 95% AFUE provides greater end user fuel savings and surpasses many competitive 90%+ unit ratings.

No-Weld Tubular Primary Heat Exchanger – tubes are designed and specified by Haier for maximum efficiency and BTU loading in 15-16 MBH increments. Tubes and in-short style burners are constructed of aluminized steel and manufactured by Beckett Gas™.

Secondary Heat Exchanger – is constructed of AL29-4C stainless steel tubes and turbulators for maximum heat transfer and provide corrosion resistance and years of reliable service.

Warranty – Limited Lifetime heat exchangers and 5 years on specified parts (see warranty statement). Installation flexibility – the HG95A allows ultimate flexibility:

  • 4-position operation.
  • Venting – through top, left or right of cabinet.
  • Electical – left or right.
  • Gas connection – left or right.
  • Condensate trap – left or right.
Converting to Down-flow – the HG95A in the easiest furnace to convert to down-flow operation:
  • Remove left or right side venting and intake knock-outs.
  • Turn furnace over.
  • If venting left discharge, rotate exhauster.
  • Reposition pressure switch tubing.
  • Install condensate tubing and trap.
  • Install vent & intake through side of chassis.
Control Capabilities –
  • Terminal for AC, humidification and air cleaning.
  • Self diagnostics with visible error code indicator.
Haier HGA Series (thumb)
Furnaces Upflow/Downflow/Horizontal 80% -
  • Propane (LP) Adaptable - Kits are available to convert a natural gas burning unit to propane burning.
  • Reliable - In addition to using proven parts, components have been tested to ANSI standards. Also every furnace is gas fired and put through a 32-step computer test before it leaves the factory.
  • Smart – The Honeywell Control Module monitors all furnace functions for reliable operation and features self-diagnostics for fast and accurate problem definition and trouble shooting. Accessory terminals are provided for humidifiers and electronic air cleaners.
  • Versatile – One model fits any need up flow, horizontal, or (with an easy conversion) down flow.
  • Warranty – is 20 years on heat exchangers and 5 years on specified parts (see warranty statement).
  • Proven – The Honeywell Smartvalue™ pilot ignition system provides reliable, efficient ignition.
  • Quick & Easy – Light weight and small size makes units easy to handle and install. One panel to burners and control systems for quick access. Return duct can enter from right, left, or bottom. Gas entry and electrical hookup is available from both left and right sides.
  • Quiet – Four-speed split capacitor blower motor provides quiet comfort to meet individual heating and cooling needs throughout the home.
  • Compact – Fits any where Only 31 5/8” tall. Allows space for add-on equipment. Perfect for retrofits.
  • Durable – Painted casing and all galvanized sheet metal parts provide corrosion resistance. The aluminized heat exchanger has no welds, ensuring longer service life.
  • Efficient – Computer designed heat exchanger and burner system provide quiet, dependable 80+% heating efficiency.
Furnace
Furnaces Upflow/Horizontal 80% - No-Weld Tubular Heat Exchanger – tubes are designed and specified by Haier for maximum efficiency and BTU loading. Tubes and in-shot style burners are constructed of aluminized steel and manufactured by Beckett Gas™.

Warranty – Limited Lifetime heat exchangers and 5 years on specified parts (see warranty statement).

Installer Friendly Features – The HG80A is designed with the contractor in mind:

  • Blower is mounted on full length rails ensuring easy access, removal and replacement.
  • Blower can be removed with or without the control panel attached.
  • Control is mounted on a panel which is secured to the rails of the blower assembly reducing vibration.
  • Control panel placement allows for easier error code viewing through the blower door, even while standing.
  • Panel mounted Motex plug allows for easy removal and connection of electrical wiring. Installation Flexibility: The HG80A allows ultimate flexibility:
  • 3-position operation.
  • Venting – through top, left or right of cabinet.
  • Electrical – left or right.
  • Gas connection – left or right. Control Capabilities:
  • Terminals for AC, humidification and air cleaning.
  • Self diagnostics with visible error code indicator.
Furnace Accessories(thumb)
Furnace Accessories

Privacy | Security | Contact Us
Copyright ©2008 Allied Supply Company

Cattail E-Commerce